Bostik No More Nails

SKU#: 181159

100g, All-Purpose Construction Adhesive, Beige

₱84
Quantity
+
-

Chat with us

Chat our online sales agent or contact our store

Bostik No More Nails is a multi-purpose construction adhesive. It is a general-purpose adhesive suitable for interior or exterior general construction work. Being highly water resistant, styrene safe with a high initial grab. It is a very versatile product. No More Nails is a gunnable synthetic rubber-based adhesive that exhibits excellent green strength, flexibility, good temperature resistance, and good slump resistance.

Product Highlights
Height (cm)
5
Width (cm)
5
Length (cm)
25
Gross Weight (kg)
0.40
Net Weight (kg)
0.18
Materials
Synthetic Rubber
Features

Features and Benefits:
• Nail free general construction adhesive
• High bond strength
• Excellent adhesion and sealing properties
• Excellent green strength
• Good temperature resistance
• Chemical resistant.
• Good slump resistance
• Bonds a variety of construction and building
materials.
• Ideal for interior and exterior applications.
• Easy to use and cost effective

Application Instruction:
Bostik No More Nails can be applied either as a two-way contact or a one-way stick adhesive. In both cases the first requirement is that both surfaces to be bonded are clean and dry and free of grease, oil or dust. Any loose or flaking paint must be removed and lightly sanded before application. (Substrate surface temperatures should not exceed 30°C and the product should not be used where continued exposure to elevated temperatures will occur). To one of the freshly prepared surfaces apply a 4 – 6mm bread of adhesive with a cartridge or extrusion gun, or similar type profiles with a notched trowel. Beads should not be more than 45cm apart and butt joints should be adhered on both panel edges. Bring both surfaces together immediately.

• Two-Way Method
Press firmly over entire surface to transfer adhesive and then pull both surfaces apart. Allow to tack-off for a few minutes (3 – 5 minutes depending on ambient weather conditions) and then, reposition and press firmly together. Contact areas should then be tapped with a hammer via a padded block to ensure intimate contact. Depending on the weather conditions and surfaces bonded, maximum bond strength will take from 12 –72 hours to be reached. Some weighted panels may require temporary mechanical fastening that should be retained for at least this period.

• One-Way Method
This method is recommended for heavier panels or those that are formed to place a loading or stressed memory on the bondline. After applying adhesive and bringing substrates together, they should be sufficiently clamped, nailed or screwed in a fashion that maintains maximum surface contact at bonded interfaces. Mechanical fasteners should be retained if highly stressed, but temporary fastening can be released after a minimum of 24 hours. For flooring applications, the adhesive should be applied to the flooring manufacturer’s specifications. To stop floors from squeaking, apply a bead of adhesive into the groove of each board after it is laid and immediately prior to mating the tongue from the next panel or board.

Others:
Appearance: Thixotropic, heavy paste like consistency
Colour:  Straw/beige
Odour: Light solvent smell
Viscosity, Approx: 300,000 cps @ 25°C
Solids Content: Approx. 77%
Specific Gravity: 1.16 g/cm³
Flammability: Flammable Flashpoint - 20°C
Chemical Resistance: Very Good
Service Temperature: - 30°C to +80°C
Working Time(initial contact): 5-10 minutes depending on temp.
Open Time(reposition): 20 to 30 minutes depending on temp.
Maximum Bond: 12-72 hours depending on temp & thickness
Materials: Synthetic Rubber

 

What's in the Box

1 x Bostik No More Nails 100G

More Information
Features

Features and Benefits:
• Nail free general construction adhesive
• High bond strength
• Excellent adhesion and sealing properties
• Excellent green strength
• Good temperature resistance
• Chemical resistant.
• Good slump resistance
• Bonds a variety of construction and building
materials.
• Ideal for interior and exterior applications.
• Easy to use and cost effective

Application Instruction:
Bostik No More Nails can be applied either as a two-way contact or a one-way stick adhesive. In both cases the first requirement is that both surfaces to be bonded are clean and dry and free of grease, oil or dust. Any loose or flaking paint must be removed and lightly sanded before application. (Substrate surface temperatures should not exceed 30°C and the product should not be used where continued exposure to elevated temperatures will occur). To one of the freshly prepared surfaces apply a 4 – 6mm bread of adhesive with a cartridge or extrusion gun, or similar type profiles with a notched trowel. Beads should not be more than 45cm apart and butt joints should be adhered on both panel edges. Bring both surfaces together immediately.

• Two-Way Method
Press firmly over entire surface to transfer adhesive and then pull both surfaces apart. Allow to tack-off for a few minutes (3 – 5 minutes depending on ambient weather conditions) and then, reposition and press firmly together. Contact areas should then be tapped with a hammer via a padded block to ensure intimate contact. Depending on the weather conditions and surfaces bonded, maximum bond strength will take from 12 –72 hours to be reached. Some weighted panels may require temporary mechanical fastening that should be retained for at least this period.

• One-Way Method
This method is recommended for heavier panels or those that are formed to place a loading or stressed memory on the bondline. After applying adhesive and bringing substrates together, they should be sufficiently clamped, nailed or screwed in a fashion that maintains maximum surface contact at bonded interfaces. Mechanical fasteners should be retained if highly stressed, but temporary fastening can be released after a minimum of 24 hours. For flooring applications, the adhesive should be applied to the flooring manufacturer’s specifications. To stop floors from squeaking, apply a bead of adhesive into the groove of each board after it is laid and immediately prior to mating the tongue from the next panel or board.

Others:
Appearance: Thixotropic, heavy paste like consistency
Colour:  Straw/beige
Odour: Light solvent smell
Viscosity, Approx: 300,000 cps @ 25°C
Solids Content: Approx. 77%
Specific Gravity: 1.16 g/cm³
Flammability: Flammable Flashpoint - 20°C
Chemical Resistance: Very Good
Service Temperature: - 30°C to +80°C
Working Time(initial contact): 5-10 minutes depending on temp.
Open Time(reposition): 20 to 30 minutes depending on temp.
Maximum Bond: 12-72 hours depending on temp & thickness
Materials: Synthetic Rubber

 

Recommended For

Recommended Uses:
• As a contact adhesive for installation of wall and floor panels.
• Most bonding applications where high strength, gap filling, one component adhesive is required.
• Timber, metal, cementitious and plaster sheets to timber or metal studs.
• Installation of battens or other fixings to brick, masonry or concrete walls.
• General-purpose construction adhesive.
• Suitable to use on foamed polystyrene.
• Ideal for mirror backed tiles

Whats In The Box

1 x Bostik No More Nails 100G

Installment Price ₱0
Height (cm) 5
Width (cm) 5
Length (cm) 25
Gross Weight (kg) 0.40
Net Weight (kg) 0.18
Additional Product Badges 0
Please note that your review will be moderated. Abusive comments will be deleted and banned.

No Related Posts